Megane 250 / 265 / 275 RS Stage 1 or 2 dyno re-map

Description

NOTE: All of our dyno work is now handled by our new sister company, EFI Tuning. The location and type of service from Chris, our tuner, is completely unchanged.

You can continue to contact us via this website, or our new EFI Tuning site. If you’d like to order and pay up front for any of our tuning options then you can now ONLY do this on our new EFI Tuning website, located here: www.efi-tuning.co.uk


Our stage 1 and 2 custom dyno tuning for the Megane RS 250 / 265 / 275 Trophy models. Cup-S tuning also available. This model uses a newer Euro 6 compliant ECU.

These options are aimed at those with relatively standard engine configurations including the original turbo, camshafts and injectors. It is recommended that you install a performance induction kit and a performance exhaust (with or without a catalytic converter) for best results when opting for a stage one tune. Stage 2 users should also upgrade their intercooler at a minimum. Factory original cars will yield a healthy gain in torque and power too from a stage 1 remap.

Our stage 1 tune aims to bring torque up to approximately 300 lb/ft and power to between 280 and 290bhp. Stage 1 cars should consider both exhaust and induction upgrades for best results.

Our stage 2 tune can be applied to those with upgraded intercoolers, exhaust systems and induction. An upgraded re-circulation (dump/blow-off) valve, or separate dump valve with turbo blanking is also advised. Torque can be raised to 350lb/ft and approximately 300-315hp.

Our tuning work is custom, meaning every car spends time on our rolling road while we adjust your ECU’s map until the result is both safe and optimal.

Aside from the performance increase the remap will include some additional benefits including:

– Fault code removal for removal of catalytic converter for example

Q: How is this re-map performed ?
A: You’ll need to book a slot with us so we can arrange to get your car on to our rolling road. Along with weekday slots we’ll often have weekend slots available too – please just ask.

Q: What parameters are you able to adjust ?
A: Just about everything. When re-mapping your ECU to accommodate hybrid turbo’s, uprated actuators, wilder cams, intake modifications and so on we’ll regularly need to alter many aspects of the ECU’s behaviour including boost control, lambda control, fueling and ignition timing amongst others.

Q: How long does it take ?
A: On average it’ll take 1-2 hrs on the rolling road.

Q: What are the common modifications you’ll tune for with a stage 1 ?
A: We’re happy to incorporate induction modifications, intercooler upgrades and exhaust upgrades (with or without a catalytic converter). The engine must retain it’s original injectors, fuel system, cams, turbo, actuator and internals.

Q: What are the common modifications you’ll tune for with a stage 2 ?
A: It requires at you have an uprated de-cat exhaust system, an induction kit or uprated filter and an effective intercooler upgrade. You should consider installing an uprated re-circulating blow off valve to the turbo, or a separate blow-off valve with turbo blanking plate. The engine must retain it’s original injectors, fuel system, cams, turbo, actuator and internals. Why not just go for a stage 2 right away ? Remember, the more you push an engine and turbo beyond what it was designed for the more inherent risk there is of shortened operating life or failure. Of course, from a tuning point of view we take all necessary precautions to minimize the chance of this, but the fact remains that with more torque and power comes greater stress on the engine. Therefore, we give you this choice

Q: Will the ECU loose it’s tune or alter over time ?
A: No, do not worry. While it’s true that some people have had this experience it means that their tuner may have missed some important steps.

Q: What if my ECU has been locked by a 3rd party ? Can you still work with it ?
A: Yes, although this takes an additional amount of work and so is subject to a £50 additional fee.

Q: If I’ve had my ECU tuned by you before, and I make alterations or upgrades, what will the cost of map adjustment be ?
A: We thought about this for some time before arriving at what we thought was the fairest solution. Updates and alterations made to any map we have performed previously for you is charged at the normal dyno hourly rate. This means that simple alterations do not cost as much as substantial ones. An upgrade from Stage 1 to Stage 2 for example might only take an hour hence a cost of £120. Upgrading a map to work with larger injectors and/or a hybrid turbo may take an hour longer.

Optional launch control inclusion, no additional charge

If you have any questions we’ll be happy to answer them – just drop us a line.