MBE Serial comms programming lead

Description

This is a 9 pin male to 9 pin female serial programming lead for use with MBE 941, 956, 967 and 970 ECU’s.

The lead is 2.2m long and uses fully screened cable to allow it to work reliably near or around a running engine.

Note: This is not a common straight through or null-modem RS232 lead. The MBE reqires some fine tolerance components to be housed inside the connector housing and uses a wiring very different from a straight through or null-modem cable.

This lead works with MBE’s Easimap software.

You will need a “D9” serial (also known as COM) port on your PC or laptop. If you do not have a serial port then you will need a USB to serial adaptor like the one shown below. Note that not all USB to serial adaptors work well! The Sewell brand we stock is proven to work well with most systems we’ve tested it with and is more reliable than most of the cheap adapters.