DTA Serial comms programming lead

This is a 15 pin to 9 pin serial programming lead for use with DTA E48 EXP, S40, S60, S80, S100 and P8 Pro ECU’s.

The lead is 2.2m long and uses fully screened cable to allow it to work reliably near or around a running engine.

This lead works with DTA’s DTAWin and DTASwin software.

You will need a “D9” serial (also known as COM) port on your PC or laptop. If you do not have a serial port then you will need a USB to serial adaptor like the one shown below. Note that not all USB to serial adaptors work well! The Sewell brand we stock is proven to work well with most systems we’ve tested it with and is more reliable than most of the cheap adapters.