Zeitronix Zt-2 wideband controller (no gauge)

Description

The latest model Zeitronix wideband AFR controller, with additional inputs for Manifold air pressure, EGT, Fluid or Air temperature, Throttle angle and other analogue inputs. Ideal for carburetted or EFI motors.

The Zt-2 controller:

The Zt-2 is an incredibly powerfull tuning aid. Not only is it a wideband controller but it can accept an array of inputs, and while connected to a lap top (via a serial cable) it can data log all of the values recorded. It is ideal for road or dyno tuning, logging 1/4m runs and track sessions, etc.

The controller comes with:
The Zt-2 Wideband AFR Controller,
Wideband Oxygen Sensor,
O2 Harness,
Signal Harness,
Datalogging Software,
Installation Instructions,
2 pin EGT connector,
Zeitronix Decal.

It is supplied with the wiring required for any function and comes with a new Bosch oxygen sensor. It is aproximately the size of a 1″ thick credit card.

Inputs

EGT – An optional EGT probe can be connected, no additional interface or loom required.
Boost – With the supplied software the Zt-2 can be connected to an optional manifold sensor to allow the gauge to show vaccuum and boost pressure.
RPM – The Zt-2 will read any standard tacho signal or can be connected to an HT coil’s negative connection.
Throttle position – The Zt-2 can be calibrated to read throttle position, as long as the engine has a throttle position sensor installed.
User 1 – A user configurable spare analogue input that can be connected to (and calibrated with) other sensors, an existing MAP sensor, etc.
User 2 – A 2nd user configurable spare analogue input that can be connected to (and calibrated with) other sensors, an existing MAP sensor, etc. Additional temperature sensing probes for Fluid or Air temperature are to be connected to this input. When a Zeitronix temperature probe is used on this input, the result can be displayed via the ZR-2 gauge or LCD display.

Outputs

Linear wideband output – AFR=Vx2+9.6
Non-linear wideband output
Serial data output – for ZR-2, LCD, etc.
Serial port – to connect to PC/lap top for configuration and real-time data logging and diaplay.
Simulated narrow band output – replacing factory probe or to feed an ECU.
Warning output

Data logging software:

With the supplied software the user can log data from all of the sensors. Ideal for those tuning their own car, or those wishing to fine tune their existing setup.

The software can record hours of data that can be easilly scrolled through at a later time.

Click the screen-shot images below to see them in full size:





Software compatable with: Windows 95,98,2000,ME,XP & Vista