Online shop: Engine management, sensors, parts
Rolling road tuning: Standalone ECU & Renault RS mapping

Zeitronix ZAVT-1 Alarm & trigger box

£74.99

The ZAVT-1 can be connected to the Zt-2’s warning output and will trigger a loud 95db alarm, a bright LED and trigger a relay when required.

999999997 in stock

Category:

Description

The ZAVT-1 can be connected to the Zt-2’s warning output and will trigger a loud 95db alarm, a bright LED and trigger a relay if required upon detection of one of the following cases:
  • AFR too rich The alarm activates when too rich mixture is detected.
  • AFR too lean The alarm activates when too lean mixture is detected.
  • A combination of AFR too rich and AFR too lean alarms can be used to tune for a specific AFR window.
  • EGT too high The alarm activates when EGT exceeds a safe user selected level.
  • RPM too high Shift-light functionality with a bonus of audio alarm and a relay trigger.
  • TPS too high The alarm activates when TPS exceeds a selected level.
  • USER1 Input too high The alarm activated if a sensor connected to the USER1 input exceeds a selected level.
  • USER1 Input too low The alarm activated if a sensor connected to the USER1 input is lower than a selected level.

Relay trigger:
Open or close a relay circuit to activate or deactivate additional devices at a set warning level. Typically used to add a control to your boost setting, nitrous or alcohol injection and other devices capable of engine destruction.

The Audio Visual Warning and Trigger Box alarm is activated by the Zeitronix Zt-2 Wideband controller. The audio alarm can be deactivated by adjusting the switch SW1 inside the box. The visual alarm and a relay trigger are always active.

The ZAVT-1 blue wire connects to the Zt-2 Warning Output (white wire with a blue stripe).

For further information and an insight into configuration, see here:
www.zeitronix.com/Products/zavt/zavt1.htm

Additional information

Weight 200 g
Featured products