Online shop: Engine management, sensors, parts
Rolling road tuning: Standalone ECU & Renault RS mapping

Wasted spark coil pack with built in ignitors

£45.99

An OEM style 4 cylinder wasted-spark ignition coil with built in 2 channel ignition amplifier (ignitor) for use directly with Adaptronic or other ECU’s that output a low corrent positive trigger.

99999955 in stock

Category:

Description

An OEM style 4 cylinder wasted-spark ignition coil with built in 2 channel ignition amplifier (ignitor) for use directly with Adaptronic or other ECU’s that output a low corrent positive trigger. These coils produce a very healthy spark, much stronger than the average 4 cylinder Zetec coil, etc. This is in part thanks to the in built ignitors removing the losses you might normally have in the low tension circuit of a normal ‘dumb’ coil.

The 4 pin plug for this coil pack is available seperately if you require it. They accept the common M4 (4mm pin inside turret) type HT leads.

7mm performance silicone leads are available in our shop HERE

Notes:

Coil pack mounting requires that the unit is earthed, ideally bolted to the engine block or body earth at least. With this coil pack there are 3 mounting holes, they should be earthed by using bolts that screw directly into a plate or mounting that is earthed.

The unit also has an in-built safety timer to protect itself in the event of a perminant live (or inverted ignition output) being present on one or both of the inputs.

The 4 pin plug should be wired as follows:

Pin 1 – trigger 1 (cylinders 1&4) from ECU
Pin 2 – 12v ignition power
Pin 3 – trigger 2 (cylinders 2&3) from ECU
Pin 4 – ground

HT leads are marked A,B,C & D on the coil which represent cylinders 1,2,3 & 4


Additional information

Weight 1500 g
Featured products