Genuine 3.5 bar boost sensor for Zeitronix units

Description

This is the genuine 3.5 bar map sensor (0 to 50psi absolute) supplied by Zeitronix capable of displaying and logging up to 36psi of boost pressure via the Zeitronix Zt-2 controller. The sensor is also capable of working with fuel and oil.

Connecting this sensor to your Zt-2 will instantly enable the digital boost display function on either your ZR-2 or LCD gauge as well as providing a boost (and vacuum) trace while recording a data log.

The sensor is made in the USA to military standards. This is a high quality sensor.

The sensor is equally capable of being used as a MAP sensor in forced induction vehicles that run at more than 2 bar of boost pressure. The added bonus is that you will not have the reduced resolution that a 4 bar map sensor might suffer from.

Specifications:
Supply voltage = 5vdc
0psi (absolute) output = 0.5v
50psi (absolute) output = 4.5v

Wiring:
Red = +5vdc (from Zt-2 or ECU)
Black = 0v (ground)
Green = signal output


Note:
It is entirely possible to connect this sensor to both the Zt-2 controller and your standalone ECU simultaneously (providing your ECU has the ability to calibrate with a 3.5bar sensor).

The sensor has a 1/8NPT male fitting and is supplied with a 4mm hose tail adaptor.