Login:
Password:

Can't remember password
   Home     Contact     Ordering & delivery     About us   
 
  Sensors, leads, etc.
  AEM Electronics
  Zeitronix Wideband
  Plugs, wiring, etc.
  Omex ECU
  Adaptronic ECU
  Knock detection
  Ignition Parts
  Accessories
  Renault tuning & parts
  Rolling road services
  Engine mapping
  Workshop services
  Injector cleaning
  Downloads
  Wiring Diagrams
  Customers Cars
  Latest news
15.03.2018 - More new Adaptronic Modular ECU's now available and added to the web shop.
02.01.2017 - New Adaptronic MODULAR ECUs added to shop
11.02.2016 - New standalone ECU for Clio RS 197/200 now available! See the Renault ECU section.
04.01.2016 - Happy new year from EFI!
29.01.2015 - NEW: Cheapest wideband AFR solution yet, from a quality source too - The Zeitronix Zt-3
Ignition parts Home  >  Ignition parts
Coil packs, ignitors, conenctors, HT leads and other ignition parts
Printer friendly version  
Wasted spark coil pack with built in ignitors
Wasted spark coil pack with built in ignitors

Quantity:  
Price: £39.99
Stock: In stock

Nearly all items are dispatched immediately but certain expensive & infrequently requested items may have a lead time. If an items delivery is to be delayed for any reason it will say so in the product description below.
An OEM style 4 cylinder wasted-spark ignition coil with built in 2 channel ignition amplifier (ignitor) for use directly with Adaptronic or other ECU's that output a low corrent positive trigger. These coils produce a very healthy spark, much stronger than the average 4 cylinder Zetec coil, etc. This is in part thanks to the in built ignitors removing the losses you might normally have in the low tension circuit of a normal 'dumb' coil.

The 4 pin plug for this coil pack is available seperately if you require it. They accept the common M4 (4mm pin inside turret) type HT leads.

7mm performance silicone leads are available in our shop HERE

Notes:

Coil pack mounting requires that the unit is earthed, ideally bolted to the engine block or body earth at least. With this coil pack there are 3 mounting holes, they should be earthed by using bolts that screw directly into a plate or mounting that is earthed.

The unit also has an in-built safety timer to protect itself in the event of a perminant live (or inverted ignition output) being present on one or both of the inputs.

The 4 pin plug should be wired as follows:

Pin 1 - trigger 1 (cylinders 1&4) from ECU
Pin 2 - 12v ignition power
Pin 3 - trigger 2 (cylinders 2&3) from ECU
Pin 4 - ground

HT leads are marked A,B,C & D on the coil which represent cylinders 1,2,3 & 4




Other items that may be of interest:

  7mm silicone HT leads for wasted spark coil pack  £32.99
  4 pin plug for wasted spark coil pack  £9.99

  Basket is empty
  Featured items
Bosch wideband oxygen sensor (LSU 4.2 7057/7351) Bosch wideband oxygen sensor (LSU 4.2 7057/7351)
£66.99
150mm diameter 36-1 Trigger wheel (5.9 150mm diameter 36-1 Trigger wheel (5.9")
£19.99
Universal air temperature sensor M12x1.5mm Universal air temperature sensor M12x1.5mm
£16.99
Phormula KS-3 knock (detonation) detection kit Phormula KS-3 knock (detonation) detection kit
£279.99
Zeitronix Zt-2 & LCD display package Zeitronix Zt-2 & LCD display package
£324.99
Boost control solenoid valve (Genuine MAC) Boost control solenoid valve (Genuine MAC)
£49.99
Zeitronix Zt-3 & ZR-3 gauge Zeitronix Zt-3 & ZR-3 gauge
£174.99
Zeitronix Zt-3 controller and sensor Zeitronix Zt-3 controller and sensor
£154.99



Copyright EFI-Parts.co.uk 2008 - 2016. Terms & conditions. All rights reserved - E&OE.