Login:
Password:

Can't remember password
   Home     Contact     Ordering & delivery     About us   
 
  Sensors, leads, etc.
  AEM Electronics
  Zeitronix Wideband
  Plugs, wiring, etc.
  Omex ECU
  Adaptronic ECU
  Knock detection
  Ignition Parts
  Accessories
  Renault tuning & parts
  Rolling road services
  Engine mapping
  Workshop services
  Injector cleaning
  Downloads
  Wiring Diagrams
  Customers Cars
  Latest news
15.03.2018 - More new Adaptronic Modular ECU's now available and added to the web shop.
02.01.2017 - New Adaptronic MODULAR ECUs added to shop
11.02.2016 - New standalone ECU for Clio RS 197/200 now available! See the Renault ECU section.
04.01.2016 - Happy new year from EFI!
29.01.2015 - NEW: Cheapest wideband AFR solution yet, from a quality source too - The Zeitronix Zt-3
Renault ECU services & parts Home  >  Renault ECU services & parts
At EFI Parts we have a lot of experience with performance Renaults of all kinds. Some of our services are listed here.
Printer friendly version  
Twingo RS 133 Stage 1 dyno re-map
Twingo RS 133 Stage 1 dyno re-map

Quantity:  
Price: £189.00
Stock: In stock

Nearly all items are dispatched immediately but certain expensive & infrequently requested items may have a lead time. If an items delivery is to be delayed for any reason it will say so in the product description below.
Be it a relatively standard RS 133 or a cammed, high compression racer with custom manifolds, we can help with your ECU tune. The option listed here is strictly for stock engines other than for breathing modifications made to induction and/or exhaust including decat, etc.

The factory original ECU is well suited to running mildly modified original engines; Modifications including filter and exhaust upgrades, inlet or exhaust manifold upgrades, mild performance camshafts, compression ratio lifts and any combination of the above. If you've performed any of these modifications and are looking for a dyno proven, custom, safe and optimal remap by somebody who knows these engines inside and out then you have come to the right place.

In the case of the RS133 the factory engine can sometimes suffer with reduced road manners and 'flat spots' (RPM specific dips in performance) when modified. Accurate calibration (mapping) with these engines is much more critical of modification compared with the Clio 172/182 for example. With the more modern ECU there are many more functions at play within, each of which must be satisfied for the engine to respond properly at all RPM's and throttle angles.

Even a standard car can benefit from a re-map. The factory ECU is bound to tight emissions regulation which mean that even from cold the engine must conform to strict fuel consumption at the expense of drivability. Richening the mixture just a few % and calming the cars lambda control from cold vastly improves these engines warm-up behaviour. The performance gains are fairly minimal with a stock engine (even if others are claiming 10hp+ - they are grossly misleading you) - the real advantage with a custom map and stock engine is in drivability and the removal of hesitations or flat spots.

Q: How is this re-map performed ?
A:
You'll need to book a slot with us so we can get your car on to our dyno here. Along with weekday slots we'll often have weekend slots available too.

Q: Will your remaps work with a decat exhaust ?
A:
Yes, upon request we will disable all catalytic functions in your ECU and remove the possibility of a check-engine-light.

Q: What 'stage' are your N/A re-maps ?
A:
This is not how we work. Everything here is custom tuned, on the dyno, in front of your eyes with explanations made along the way should you be curious. A re-map of a standard engine yields only marginal performance gains and anything other than standard should be considered custom since no two modified engines are the same. As a result it is near-impossible to categorize different levels of tune, unlike a turbocharged engine.

Q: What parameters are you able to adjust ?
A:
Just about everything. When re-mapping your ECU to accommodate wilder cams, intake modifications and the like we'll regularly need to alter the ECU's idle control parameters, throttle behaviour, transient fueling, RPM limits, lambda control, warm-up behaviour, VVT operation and of course fuel and spark timing.

Q: How long does it take ?
A:
On average it'll take 1-2 hrs on the rolling road.

Q: What are the common modifications you'll tune for ?
A:
Exhaust/header swaps, often coupled with other upgrades like matched ports, de-cat and improved induction.

Wilder N/A engines with camshaft swaps, larger injectors and such like are catered for with our Advanced option. Please drop us an email if you have any other questions.

N.B: The before-after dyno plots shown here were made with a fairly standard RS 133 with an induction kit, decat manifold and performance exhaust. The dyno plots show the before and after our remap. Low RPM hesitations are eliminated.

Note: The term "live" mapped these days has become interchangeable with "custom dyno tuned". The Renault ECU is not in fact mapped live, rather data is collected, the ECU adjusted and the engine run again. This sequence repeats until we are happy the engine is calibrated.

For wilder engine upgrades (including turbos, superchargers, etc.) please get in touch so we can discuss other options. It may be that we can still adjust the stock ECU to suit or it may be that a fully programmable standalone ECU is the best way to go. This is usually the case for higher powered forced induction engines.



Other items that may be of interest:

  Twingo RS 133 Advanced ECU dyno re-map  £289.00

  Basket is empty
  Featured items
Boost control solenoid valve (Genuine MAC) Boost control solenoid valve (Genuine MAC)
£49.99
Bosch wideband oxygen sensor (LSU 4.2 7057/7351) Bosch wideband oxygen sensor (LSU 4.2 7057/7351)
£66.99
Zeitronix Zt-2 & LCD display package Zeitronix Zt-2 & LCD display package
£324.99
Phormula KS-3 knock (detonation) detection kit Phormula KS-3 knock (detonation) detection kit
£279.99
Zeitronix Zt-3 & ZR-3 gauge Zeitronix Zt-3 & ZR-3 gauge
£174.99
Zeitronix Zt-3 controller and sensor Zeitronix Zt-3 controller and sensor
£154.99
Universal air temperature sensor M12x1.5mm Universal air temperature sensor M12x1.5mm
£16.99
150mm diameter 36-1 Trigger wheel (5.9 150mm diameter 36-1 Trigger wheel (5.9")
£19.99



Copyright EFI-Parts.co.uk 2008 - 2016. Terms & conditions. All rights reserved - E&OE.