Login:
Password:

Can't remember password
   Home     Contact     Ordering & delivery     About us   
 
  Sensors, leads, etc.
  AEM Electronics
  Zeitronix Wideband
  Plugs, wiring, etc.
  Omex ECU
  Adaptronic ECU
  Knock detection
  Ignition Parts
  Accessories
  Renault tuning & parts
  Rolling road services
  Engine mapping
  Workshop services
  Injector cleaning
  Downloads
  Wiring Diagrams
  Customers Cars
  Latest news
15.03.2018 - More new Adaptronic Modular ECU's now available and added to the web shop.
02.01.2017 - New Adaptronic MODULAR ECUs added to shop
11.02.2016 - New standalone ECU for Clio RS 197/200 now available! See the Renault ECU section.
04.01.2016 - Happy new year from EFI!
29.01.2015 - NEW: Cheapest wideband AFR solution yet, from a quality source too - The Zeitronix Zt-3
Zeitronix wideband Home  >  Zeitronix wideband
Your official Zeitronix dealer
Wideband Air:Fuel ratio gauges and data loggers
Printer friendly version  
EGT Probe & 8 foot extension for Zeitronix
EGT Probe & 8 foot extension for Zeitronix

Quantity:  
Price: £72.99
Stock: In stock

Nearly all items are dispatched immediately but certain expensive & infrequently requested items may have a lead time. If an items delivery is to be delayed for any reason it will say so in the product description below.
An EGT probe suitable for use with the Zeitronix Zt-2 wideband controller and data logger. Works with any system requiring a k-type probe. It comes with the common k-type connector and is supplied with an 8 foot extension cable.

It has a 1/8 NPT thread for mounting into the exhaust manifold. If the manifold is of the tube type, or its wall thickness is not suitable for tapping then you may also need the stainless steel 1/8 NPT weld-in boss that we stock.

Notes:

On turbocharged engine the EGT probe should be placed before the turbo. A high temperature drop occurs across the turbocharger which will throw off any EGT readings taken after a turbo. This temperature drop is variable and so the preferred EGT probe location is before the turbo.

Place the EGT wires as far as possible from the ignition components such as plugs, plug wires, and coils. Since the ignition components carry thousands volts they are a very powerful sources of EMI noise. The EMI noise may be inducted into the EGT wires. The Zt-2 has a sophisticated common noise rejection circuit, however the EGT signals are in mili volt levels (0.001V) where the ignition carries tens of thousands (10000) volts and placing the EGT wires near the ignition components may result in false peak EGT readings.



Other items that may be of interest:

  1/8" NPT Stainless steel boss  £4.49

  Basket is empty
  Featured items
Boost control solenoid valve (Genuine MAC) Boost control solenoid valve (Genuine MAC)
£49.99
Universal air temperature sensor M12x1.5mm Universal air temperature sensor M12x1.5mm
£16.99
Zeitronix Zt-3 & ZR-3 gauge Zeitronix Zt-3 & ZR-3 gauge
£174.99
Bosch wideband oxygen sensor (LSU 4.2 7057/7351) Bosch wideband oxygen sensor (LSU 4.2 7057/7351)
£66.99
Zeitronix Zt-2 & LCD display package Zeitronix Zt-2 & LCD display package
£324.99
150mm diameter 36-1 Trigger wheel (5.9 150mm diameter 36-1 Trigger wheel (5.9")
£19.99
Zeitronix Zt-3 controller and sensor Zeitronix Zt-3 controller and sensor
£154.99
Phormula KS-3 knock (detonation) detection kit Phormula KS-3 knock (detonation) detection kit
£279.99



Copyright EFI-Parts.co.uk 2008 - 2016. Terms & conditions. All rights reserved - E&OE.