Login:
Password:

Can't remember password
   Home     Contact     Ordering & delivery     About us   
 
  Sensors, leads, etc.
  AEM Electronics
  Zeitronix Wideband
  Plugs, wiring, etc.
  Omex ECU
  Adaptronic ECU
  Knock detection
  Ignition Parts
  Accessories
  Renault tuning & parts
  Rolling road services
  Engine mapping
  Workshop services
  Injector cleaning
  Downloads
  Wiring Diagrams
  Customers Cars
  Latest news
02.01.2017 - New Adaptronic MODULAR ECUs added to shop
11.02.2016 - New standalone ECU for Clio RS 197/200 now available! See the Renault ECU section.
04.01.2016 - Happy new year from EFI!
29.01.2015 - NEW: Cheapest wideband AFR solution yet, from a quality source too - The Zeitronix Zt-3
22.07.2014 - Clio 172 & 182 custom remapping now available
Renault ECU services & parts Home  >  Renault ECU services & parts
At EFI Parts we have a lot of experience with performance Renaults of all kinds. Some of our services are listed here.
Printer friendly version  
Megane 225 / 230 / R26 Stage 1 or 2 dyno re-map
Megane 225 / 230 / R26 Stage 1 or 2 dyno re-map

Quantity:  
Price: £329.00
Stock: In stock

Nearly all items are dispatched immediately but certain expensive & infrequently requested items may have a lead time. If an items delivery is to be delayed for any reason it will say so in the product description below.
Our stage 1 and 2 custom dyno tuning for the Megane 225 / 230 / R26.

These options are aimed at those with relatively standard engine configurations including the original turbo, camshafts and injectors. It is recommended that you install a performance induction kit and a performance exhaust (with or without a catalytic converter) for best results when opting for a stage one tune. Stage 2 users should also upgrade their intercooler at a minimum. Factory original cars will yield a healthy gain in torque and power too from a stage 1 remap.

Our stage 1 tune aims to bring torque up to approximately 270lb/ft and power to between 250 and 260bhp. Stage 1 cars should consider both exhaust and induction upgrades for best results.

Our stage 2 tune can be applied to those with upgraded intercoolers, exhaust systems and induction. An upgraded re-circulation (dump/blow-off) valve, or separate dump valve with turbo blanking is also advised. Torque can be raised to 300lb/ft and 270hp typically.

Our tuning work is custom, meaning every car spends time on our rolling road while we adjust your ECU's map until the result is both safe and optimal.

Aside from the performance increase the remap will include some additional benefits including:

- Improved warm-up behaviour.
- Fault code removal for such things as decat and light weight / single mass flywheels.
- Speed limiter removal upon request.

Q: How is this re-map performed ?
A:
You'll need to book a slot with us so we can arrange to get your car on to our rolling road. Along with weekday slots we'll often have weekend slots available too - please just ask.

Q: What parameters are you able to adjust ?
A:
Just about everything. When re-mapping your ECU to accommodate hybrid turbo's, uprated actuators, wilder cams, intake modifications and so on we'll regularly need to alter many aspects of the ECU's behaviour including boost control, lambda control, fueling and ignition timing amongst others.

Q: How long does it take ?
A:
On average it'll take 2-3 hrs on the rolling road.

Q: What are the common modifications you'll tune for with a stage 1 ?
A:
We're happy to incorporate induction modifications, intercooler upgrades and exhaust upgrades (with or without a catalytic converter). The engine must retain it's original injectors, fuel system, cams, turbo, actuator and internals.

Q: What are the common modifications you'll tune for with a stage 2 ?
A:
It requires at you have an uprated de-cat exhaust system, an induction kit or uprated filter and an effective intercooler upgrade. You should consider installing an uprated re-circulating blow off valve to the turbo, or a separate blow-off valve with turbo blanking plate. The engine must retain it's original injectors, fuel system, cams, turbo, actuator and internals. Why not just go for a stage 2 right away ? Remember, the more you push an engine and turbo beyond what it was designed for the more inherent risk there is of shortened operating life or failure. Of course, from a tuning point of view we take all necessary precautions to minimize the chance of this, but the fact remains that with more torque and power comes greater stresses on the engine. Therefore, we offer a choice!

Q: Will the ECU loose it's tune or alter over time ?
A:
No, do not worry. While it's true that some people have had this experience it means that their tuner may have missed some important steps.

Q: What if my ECU has been locked by a 3rd party ? Can you still work with it ?
A:
Yes, although this takes an additional amount of work and so is subject to a 30 additional fee.

Q: If I've had my ECU tuned by you before, and I make alterations or upgrades, what will the cost of map adjustment be ?
A:
We thought about this for some time before arriving at what we thought was the fairest solution. Updates and alterations made to any map we have performed previously for you is charged at 80 + the normal dyno hourly rate. This means that simple alterations do not cost as much as substantial ones. An upgrade from Stage 1 to Stage 2 for example might only take an hour hence a cost of 160. Upgrading a map to work with larger injectors and/or a hybrid turbo may take an hour longer.

If you have any questions we'll be happy to answer them - just drop us a line.



Other items that may be of interest:

  Megane 225 / 230 / R26 Custom re-map  £389.00
  Megane 225 / 230 / R26 Advanced re-map  £489.00

  Basket is empty
  Featured items
Phormula KS-3 knock (detonation) detection kit Phormula KS-3 knock (detonation) detection kit
£279.99
Zeitronix Zt-3 & ZR-3 gauge Zeitronix Zt-3 & ZR-3 gauge
£174.99
Universal air temperature sensor M12x1.5mm Universal air temperature sensor M12x1.5mm
£16.99
Bosch wideband oxygen sensor (LSU 4.2 7057/7351) Bosch wideband oxygen sensor (LSU 4.2 7057/7351)
£66.99
150mm diameter 36-1 Trigger wheel (5.9 150mm diameter 36-1 Trigger wheel (5.9")
£19.99
Zeitronix Zt-2 & LCD display package Zeitronix Zt-2 & LCD display package
£324.99
Boost control solenoid valve (Genuine MAC) Boost control solenoid valve (Genuine MAC)
£49.99
Zeitronix Zt-3 controller and sensor Zeitronix Zt-3 controller and sensor
£154.99



Copyright EFI-Parts.co.uk 2008 - 2016. Terms & conditions. All rights reserved - E&OE.